Buchi SpeedDigester K-436 Instrukcja Użytkownika Pobierz pdf (Strona 31)

6 Operation

31 K-425 / K-436 Operation Manual, Version A

To Scrubber or

water jet pump

Example with two glass

caps installed!

Check for proper and • tight seating of each rubber sealing 5.

➥ If necessary unlock the handles again and readjust the suction module!

Plug the suction hose with plug onto the suction module • 6.

➥ The plug catches with a noticable *click* sound.

If applicable, follow the previous steps to install a suction module on a second rack.•

Switch on the Scrubber or water jet pump and activate the fume hood ventilation.•

➡The rack(s) can now safely be processed in the SpeedDigester.

Note

Clean all glass parts before mounting to avoid cross contamination.•

When a water jet pump is used, hazardous vapours can escape into the environmental air if the •

suction is inadequate.

If a Scrubber without condensation step is used, the condensate that accrues must be absorbed •

by means of a Woulff bottle between the SpeedDigester K-425 / K-436 and the Scrubber.

When operating with 3rd party sample tubes no insulation caps and glass caps are available. In •

this case, all positions must be equipped with samples!

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 57 58

Brak uwag

Buchi SpeedDigester K-436 Instrukcja Użytkownika Strona 31